Manufacturer & Exporter of Converting & Flexible Packaging Machinery
Call Us Now
+91 9512852352
Call Us Now
+91 9512852352
POUCHING2
Pouching 2
This modern new generation press is built to cater demands of the continuously evolving flexible packaging industries. Machine is designed ergonomically to cater medium and long run length job.
High productivity, low conversion cost, high quality printing, fast job change-over are the key features.
| Standard Technical Specification | |
|---|---|
| Maximum web width | 1300 mm |
| Printing cylinder repeat range | 450 to 920 mm |
| Maximum mechanical speed | 450 m/min |
| Web tension range | 60 to 400 N |
| Standard drying hood length | 2.0 mtr |
| Reel diameter | 1000 mm |
Pouching 2 Manufacture by AAYAR INTERNATIONAL
The Machine
The new generation Rotogravure Press is led by ELS technology. By perfectly integration of advanced electronics and ergonomically designed mechanical components to deliver optimum performance, Better operational ease, faster print register response, higher productivity, better print quality, less waste, optimizing ink solvent and energy consumption, faster job changeover etc.
PRODUCT
Extrusion Laminating Machine
For Flexible Packaging
Converters who want to enhance and upscale lamination quality and increase productivity at low conversion cost.
A step towards producing more sustainable plastic products and not only lighten the environmental footprint but also by producing recyclable and upcycle goods reduces the load on the waste management.
PRODUCT
Rotogravure Printing Press
The new generation of Rotogravure Press is led by Electronic Line Shaft Technology (ELS). Some advantages compared to conventional mechanical transmissions are : better operator access around the press, reduction in noise level.
By perfectly integrating new generation of electronics and ergonomically designed mechanical components, the press is made to deliver optimum performance and productivity.
PRODUCT
Laminating Machine
Rotogravure Printing Press
This modern new generation press is built to cater demands of the continuously evolving flexible packaging industries.
Machine is designed ergonomically to cater medium and long run length job.
High productivity, low conversion cost, high quality printing, fast job change-over are the key features.
PRODUCT
Slitter
With the combination of proven Aayar and with the advantages of our modern technology.
Slitter is the ideal solution for the modern converter that demands to produce excellent quality rolls, by increasing the productivity, especially on the down-time between working cycles, while minimise the traditional bottlenecks in the slitting area.
PRODUCT
Rotogravure Printing Press Mechanical line
Rotogravure Printing Press
The Press is built with Mechanical line shaft with servo technology.
By perfectly integrating the new generation of electronics and ergonomically designed mechanical components, the machine is made to deliver optimum performance and productivity.
PRODUCT
Solvent – Less Laminator
The machine is designed to handle a wide range of laminating jobs and to cater growing needs of solvent-less lamination on flexible packaging market.
High productivity, easy operating, optimum energy consumption and ability to handle wide range of laminating jobs are the key features.
By perfectly integration of the new generation of electronics and ergonomically designed mechanical components, the machine is made to deliver optimum performance and productivity.
Pouching 2
This modern new generation press is built to cater demands of the continuously evolving flexible packaging industries. Machine is designed ergonomically to cater medium and long run length job.
High productivity, low conversion cost, high quality printing, fast job change-over are the key features.
| Standard Technical Specification | |
|---|---|
| Maximum web width | 1300 mm |
| Printing cylinder repeat range | 450 to 920 mm |
| Maximum mechanical speed | 450 m/min |
| Web tension range | 60 to 400 N |
| Standard drying hood length | 2.0 mtr |
| Reel diameter | 1000 mm |
Pouching 2 Manufacture by
AAYAR INTERNATIONAL
The Machine
The new generation Rotogravure Press is led by ELS technology. By perfectly integration of advanced electronics and ergonomically designed mechanical components to deliver optimum performance, Better operational ease, faster print register response, higher productivity, better print quality, less waste, optimizing ink solvent and energy consumption, faster job changeover etc.
Service Cart (Trolley System)
Specially designed Cart facilitates ease for insertion and extraction from the printing station. Thanks to a special mechanism: Cart slides on linear guide rail which ensures perfect in & out operation; only one operator can easily carry out the operation.
To carry out loading I unloading of gravure cylinder there is a lifting system onboard on the cart, which consist of hydraulic piston, levers etc.
- Possibility to remove only the inking system, leaving the printing cylinder in the printing station
- Possibility to remove only the printing cylinder, leaving the inking system in the printing station
- Possibility to remove the printing cylinder together with the inking system at the same time
Print Station Controls
Specially designed Cart facilitates ease for insertion and extraction from the printing station. Thanks to a special mechanism: Cart slides on linear guide rail which ensures perfect in & out operation; only one operator can easily carry out the operation.
To carry out loading I unloading of gravure cylinder there is a lifting system onboard on the cart, which consist of hydraulic piston, levers etc.
- Possibility to remove only the inking system, leaving the printing cylinder in the printing station
- Possibility to remove only the printing cylinder, leaving the inking system in the printing station
- Possibility to remove the printing cylinder together with the inking system at the same time
High Efficient Ventilation Module
Specially designed Cart facilitates ease for insertion and extraction from the printing station. Thanks to a special mechanism: Cart slides on linear guide rail which ensures perfect in & out operation; only one operator can easily carry out the operation.
To carry out loading I unloading of gravure cylinder there is a lifting system onboard on the cart, which consist of hydraulic piston, levers etc.
- Possibility to remove only the inking system, leaving the printing cylinder in the printing station
- Possibility to remove only the printing cylinder, leaving the inking system in the printing station
- Possibility to remove the printing cylinder together with the inking system at the same time
Unique Designed Doctor Blade Group
Specially designed Cart facilitates ease for insertion and extraction from the printing station. Thanks to a special mechanism: Cart slides on linear guide rail which ensures perfect in & out operation; only one operator can easily carry out the operation.
To carry out loading I unloading of gravure cylinder there is a lifting system onboard on the cart, which consist of hydraulic piston, levers etc.
- Possibility to remove only the inking system, leaving the printing cylinder in the printing station
- Possibility to remove only the printing cylinder, leaving the inking system in the printing station
- Possibility to remove the printing cylinder together with the inking system at the same time
Unwind Group
Specially designed Cart facilitates ease for insertion and extraction from the printing station. Thanks to a special mechanism: Cart slides on linear guide rail which ensures perfect in & out operation; only one operator can easily carry out the operation.
To carry out loading I unloading of gravure cylinder there is a lifting system onboard on the cart, which consist of hydraulic piston, levers etc.
- Possibility to remove only the inking system, leaving the printing cylinder in the printing station
- Possibility to remove only the printing cylinder, leaving the inking system in the printing station
- Possibility to remove the printing cylinder together with the inking system at the same time
In-Feed Web Handling Control
Specially designed Cart facilitates ease for insertion and extraction from the printing station. Thanks to a special mechanism: Cart slides on linear guide rail which ensures perfect in & out operation; only one operator can easily carry out the operation.
To carry out loading I unloading of gravure cylinder there is a lifting system onboard on the cart, which consist of hydraulic piston, levers etc.
- Possibility to remove only the inking system, leaving the printing cylinder in the printing station
- Possibility to remove only the printing cylinder, leaving the inking system in the printing station
- Possibility to remove the printing cylinder together with the inking system at the same time
Control System
Specially designed Cart facilitates ease for insertion and extraction from the printing station. Thanks to a special mechanism: Cart slides on linear guide rail which ensures perfect in & out operation; only one operator can easily carry out the operation.
To carry out loading I unloading of gravure cylinder there is a lifting system onboard on the cart, which consist of hydraulic piston, levers etc.
- Possibility to remove only the inking system, leaving the printing cylinder in the printing station
- Possibility to remove only the printing cylinder, leaving the inking system in the printing station
- Possibility to remove the printing cylinder together with the inking system at the same time
Operator Interface
Specially designed Cart facilitates ease for insertion and extraction from the printing station. Thanks to a special mechanism: Cart slides on linear guide rail which ensures perfect in & out operation; only one operator can easily carry out the operation.
To carry out loading I unloading of gravure cylinder there is a lifting system onboard on the cart, which consist of hydraulic piston, levers etc.
- Possibility to remove only the inking system, leaving the printing cylinder in the printing station
- Possibility to remove only the printing cylinder, leaving the inking system in the printing station
- Possibility to remove the printing cylinder together with the inking system at the same time
Print Unit
Specially designed Cart facilitates ease for insertion and extraction from the printing station. Thanks to a special mechanism: Cart slides on linear guide rail which ensures perfect in & out operation; only one operator can easily carry out the operation.
To carry out loading I unloading of gravure cylinder there is a lifting system onboard on the cart, which consist of hydraulic piston, levers etc.
- Possibility to remove only the inking system, leaving the printing cylinder in the printing station
- Possibility to remove only the printing cylinder, leaving the inking system in the printing station
- Possibility to remove the printing cylinder together with the inking system at the same time
Sleeve Type Impression Assembly
Specially designed Cart facilitates ease for insertion and extraction from the printing station. Thanks to a special mechanism: Cart slides on linear guide rail which ensures perfect in & out operation; only one operator can easily carry out the operation.
To carry out loading I unloading of gravure cylinder there is a lifting system onboard on the cart, which consist of hydraulic piston, levers etc.
- Possibility to remove only the inking system, leaving the printing cylinder in the printing station
- Possibility to remove only the printing cylinder, leaving the inking system in the printing station
- Possibility to remove the printing cylinder together with the inking system at the same time
Transmission
Specially designed Cart facilitates ease for insertion and extraction from the printing station. Thanks to a special mechanism: Cart slides on linear guide rail which ensures perfect in & out operation; only one operator can easily carry out the operation.
To carry out loading I unloading of gravure cylinder there is a lifting system onboard on the cart, which consist of hydraulic piston, levers etc.
- Possibility to remove only the inking system, leaving the printing cylinder in the printing station
- Possibility to remove only the printing cylinder, leaving the inking system in the printing station
- Possibility to remove the printing cylinder together with the inking system at the same time
Drying System
Specially designed Cart facilitates ease for insertion and extraction from the printing station. Thanks to a special mechanism: Cart slides on linear guide rail which ensures perfect in & out operation; only one operator can easily carry out the operation.
To carry out loading I unloading of gravure cylinder there is a lifting system onboard on the cart, which consist of hydraulic piston, levers etc.
- Possibility to remove only the inking system, leaving the printing cylinder in the printing station
- Possibility to remove only the printing cylinder, leaving the inking system in the printing station
- Possibility to remove the printing cylinder together with the inking system at the same time
Out-Feed System
Specially designed Cart facilitates ease for insertion and extraction from the printing station. Thanks to a special mechanism: Cart slides on linear guide rail which ensures perfect in & out operation; only one operator can easily carry out the operation.
To carry out loading I unloading of gravure cylinder there is a lifting system onboard on the cart, which consist of hydraulic piston, levers etc.
- Possibility to remove only the inking system, leaving the printing cylinder in the printing station
- Possibility to remove only the printing cylinder, leaving the inking system in the printing station
- Possibility to remove the printing cylinder together with the inking system at the same time
Rewind Group
Specially designed Cart facilitates ease for insertion and extraction from the printing station. Thanks to a special mechanism: Cart slides on linear guide rail which ensures perfect in & out operation; only one operator can easily carry out the operation.
To carry out loading I unloading of gravure cylinder there is a lifting system onboard on the cart, which consist of hydraulic piston, levers etc.
- Possibility to remove only the inking system, leaving the printing cylinder in the printing station
- Possibility to remove only the printing cylinder, leaving the inking system in the printing station
- Possibility to remove the printing cylinder together with the inking system at the same time
C.P.S System
Specially designed Cart facilitates ease for insertion and extraction from the printing station. Thanks to a special mechanism: Cart slides on linear guide rail which ensures perfect in & out operation; only one operator can easily carry out the operation.
To carry out loading I unloading of gravure cylinder there is a lifting system onboard on the cart, which consist of hydraulic piston, levers etc.
- Possibility to remove only the inking system, leaving the printing cylinder in the printing station
- Possibility to remove only the printing cylinder, leaving the inking system in the printing station
- Possibility to remove the printing cylinder together with the inking system at the same time